What is different of the 3D Obsidian ALR and the normally Obsidian ALR?
VIVIDSTORM always want to offer the best choice for different projector's request;
If your projector has low lumens, use a projector with a long throw or standard throw;
But want to watch the screen under low light conditions;
Because we haveย 3D Obsidian ALRย andย the normally Obsidianย ALR screen material can be choice,itย will make confuse when you purchase it before;
We suggest that you can choose the screen material that suits you through the video:
Summarize:
Please remember that there are falsely labeled lumens indicators on the market, so please refer to ANSI lumens as the standard reference value;
A: If the ANSI lumens of your projector is lower than 1800, we suggest you choose 1.2 gainย 3Dย Obsidian ALR screen material
B: If the ANSI lumens of your projector is higher than 1800, we suggest you choose 0.8 gainย the normally Obsidianย ALR screen material
ย
ย









1ไปถใฎใณใกใณใ
Shouldnโt you also consider screen size in addition to projector brightness? For example, 1000-1500 lumens on a 100" diagonal screen is quite bright (100-150 nits), while on a 140" screen itโs much reduced (50-80 nits).
My specific situation: should I pick 3D Obsidian ALR or Normal Obsidian ALR for a 100" diagonal image, with a 1000 lumen (calibrated, not specโd) projector, in a room that is completely dark however it has light colored walls and a white ceiling that reflects a lot of light back to the screen?
ใณใกใณใใๆฎใ
ใณใกใณใใฏๅ ฌ้ๅใซๆฟ่ชใใใๅฟ ่ฆใใใใใจใซใๆณจๆใใ ใใใ